Share Your Sprites!

[ShallowB]

2 hours ago, BluePineapple72 said:

I was thinking of maybe having the HK sort of 'ouroboroused' into his own stomach hole like some weird vacuum - but I'd like for there to be some remains leftover once he passes.

 

Maybe do it in reverse.  He turns inside out from his stomache hole!

[Wo0p]

7 hours ago, BluePineapple72 said:

 

Hey Spriters! I'm working on finalizing this Hell Knight sprite and I need ideas for a unique death animation. Feel free to spitball anything at me. I was thinking of maybe having the HK sort of 'ouroboroused' into his own stomach hole like some weird vacuum - but I'd like for there to be some remains leftover once he passes. (maybe once he's sucked in he's crushed and some guts remain?)

I'll sketch some ideas eventually but some brainstorming help would assist me in pushing this the extra mile. The project is The Chilling Winds of Dis - this sprite is a local of an abstract area of hell that is really cold, really dark, and is rotting and dying and edgy and shit. I'd like his death to resemble that in some way.

 

Also, @Desfar you mentioned something about using some projectiles I had posted. I don't know which specific projectiles you refer to, and I don't remember posting any resources beyond just previews and images: would you want me to send you a .zip or .wad of said projectiles for your Lich sprite?

 

An idea! A few bullet holes appear to make it look as if his "structural integrity" has been compromised and the effects are seen immediately after: All his innards and muscle tissue and basically anything underneath his skin gets sucked out through the hole, kinda like reverse vaccuum like @ShallowB is unto, that leaves his skinsuit like a hollow cape by the end of it floating down unto the giant pile of slowly freezing gore that fell out of him.

 

Disgusting but... I dunno. Seemed to fit with the theme, in my psycho noggin :>

Edited October 10, 2023 by Wo0p

[Desfar]

14 hours ago, BluePineapple72 said:

 

Hey Spriters! I'm working on finalizing this Hell Knight sprite and I need ideas for a unique death animation. Feel free to spitball anything at me. I was thinking of maybe having the HK sort of 'ouroboroused' into his own stomach hole like some weird vacuum - but I'd like for there to be some remains leftover once he passes. (maybe once he's sucked in he's crushed and some guts remain?)

I'll sketch some ideas eventually but some brainstorming help would assist me in pushing this the extra mile. The project is The Chilling Winds of Dis - this sprite is a local of an abstract area of hell that is really cold, really dark, and is rotting and dying and edgy and shit. I'd like his death to resemble that in some way.

 

Also, @Desfar you mentioned something about using some projectiles I had posted. I don't know which specific projectiles you refer to, and I don't remember posting any resources beyond just previews and images: would you want me to send you a .zip or .wad of said projectiles for your Lich sprite?

Very much appreciated for the sprites!

And for the knight, Im afraid to think of how many frames it might take, but I cannot help but think of this scene.

Spoiler

 

I would do it through the surrounding skin bursting, the blood swirling into the pinprick of the knights core. then have some gore making up the limbs or head making up the final gore pile. whatever is furthest from the hole when it finally dies out.

Edited October 10, 2023 by Desfar

[Nihlith]

2 hours ago, Desfar said:

Very much appreciated for the sprites!

And for the knight, Im afraid to think of how many frames it might take, but I cannot help but think of this scene.

  Hide contents

 

I would do it through the surrounding skin bursting, the blood swirling into the pinprick of the knights core. then have some gore making up the limbs or head making up the final gore pile. whatever is furthest from the hole when it finally dies out.

I was imagining the same scene before the reveal. Couldn't think of how to animate it though.

[Desfar]

1 hour ago, Nihlith said:

I was imagining the same scene before the reveal. Couldn't think of how to animate it though.

This is the best I can imagine. ( on a 10 minute quick edit)
Though this is just a rough mockup, I'm sure the PineGuy will make something much better, and i dont wanna step on any toes.
But this till completion with all the gibs pouring inwards.

Edited October 10, 2023 by Desfar

[BluePineapple72]

7 hours ago, Desfar said:

This is the best I can imagine. ( on a 10 minute quick edit)
Though this is just a rough mockup, I'm sure the PineGuy will make something much better, and i dont wanna step on any toes.
But this till completion with all the gibs pouring inwards.

 

 

Here's what I have made insofar inspired by what you've done. Will need to doo some touchups though. Having the gore frames at the end look natural will be challenging. I may make the fourth frame have some 'impact' as if the swirl has hit the ground

 

EDIT:

 

 

Will need some TLC and detailing so that some aspects of this look more fleshed out and transition better. I'll have to stare at this gif for a few hours to see what needs what. Mainly I don't want there to be too much pixel clutter, especially in the early frames.

Edited October 11, 2023 by BluePineapple72

[Desfar]

2 hours ago, BluePineapple72 said:

 

 

Here's what I have made insofar inspired by what you've done. Will need to doo some touchups though. Having the gore frames at the end look natural will be challenging. I may make the fourth frame have some 'impact' as if the swirl has hit the ground

 

EDIT:

 

 

Will need some TLC and detailing so that some aspects of this look more fleshed out and transition better. I'll have to stare at this gif for a few hours to see what needs what. Mainly I don't want there to be too much pixel clutter, especially in the early frames.

I'm mesmerized by the little splashing pixels.

Looks wonderful!

[Crankywankynarancia]

The stonks are low!!!! What I have SAID you?!

[Scypek2]

17 hours ago, BluePineapple72 said:

Will need some TLC and detailing so that some aspects of this look more fleshed out and transition better. I'll have to stare at this gif for a few hours to see what needs what. Mainly I don't want there to be too much pixel clutter, especially in the early frames.

 

Nice! Maybe one of the bits could break off early on, and slide far across from left to right as the momentum of rotation tosses it away?

[DoomGappy]

18 hours ago, BluePineapple72 said:

 

 

Here's what I have made insofar inspired by what you've done. Will need to doo some touchups though. Having the gore frames at the end look natural will be challenging. I may make the fourth frame have some 'impact' as if the swirl has hit the ground

 

EDIT:

 

 

Will need some TLC and detailing so that some aspects of this look more fleshed out and transition better. I'll have to stare at this gif for a few hours to see what needs what. Mainly I don't want there to be too much pixel clutter, especially in the early frames.

 

I think you should make a variant where the pixels just vanish. That's what I was expecting from the swirl. Still looks good, though.

[ShallowB]

18 hours ago, BluePineapple72 said:

 

 

 

 

Today on Will It Blend? …  

[Sonik.o.fan]

Demons mugshots

[SuperDave938]

The SoD!

 

Credits:

TerminusEst13 and JoeyTD

[Desfar]

I just found that someone ripped files for the Doom2 RPG mobile game.
They feature a handy new critter called a 'Watcher'.
Very hard symmetry for the A1 angle, though arms and tail will likely swish as it moves.
And I imagine it floats, though I like the idea of it knuckle walking.

Starting the next leg of the cyber ettin...
Head rotations.

Edit: Taking a minute from a side project to keep working on this, and i figured i would save the heads as they progressed.
Its really amazing what the simple addition of the Etin horns does to the profile.
Stage 1, basic CyberDemo.
Stage2, hornless and sad.
Stage 3, now a fish boi
Stage4, Forehead plating, as well as horns.
Stage 5, Horns arrived!
Stage6, minor mouth adjustments

Edited October 13, 2023 by Desfar

[DoomGappy]

Has anybody ever ripped the Cowboy sprites from A Fistful of Doom enemies? I think they are really cool. There should be more cowboy and lone rider themed wads. 

[TommyGalano5]

30 minutes ago, jo2ukegappy said:

Has anybody ever ripped the Cowboy sprites from A Fistful of Doom enemies? I think they are really cool. There should be more cowboy and lone rider themed wads. 

here

Western.zip

[DoomGappy]

4 minutes ago, TommyGalano5 said:

here

Western.zip

 

Thank you very much!

[Lizardcommando]

Does anyone have any sprites of the Crucible with the classic Doomguy hands holding it? If not, than any lightsaber sprites with classic Doomguy hands holding it?

[Craneo]

Two D64 custom spritesheets I did today and yesterday, credits in the images

Quote

 

[TommyGalano5]

goofy

[Sonikkumania]

On 10/2/2023 at 6:34 PM, Sonik.o.fan said:

MG-42 

Would it be possible to use this, obviously with citing the author?

[Cascade]

Silly alien that replaces keen sprite

 

[whatup876]

Is this inspired by FreeDoom' Keen replacement?

[Cascade]

1 minute ago, whatup876 said:

Is this inspired by FreeDoom' Keen replacement?

Yea it is intended to be the one from freedoom

[Sonik.o.fan]

11 hours ago, Sonikkumania said:

Would it be possible to use this, obviously with citing the author?

My stuff is 101% free to use

[WARDUST]

Remastering my icespiders...

[SuperDave938]

https://www.mediafire.com/file/u0h0xr1wbpryubu/BJ+Skins.zip/file

 

BJ player sprite redux

Edited October 17, 2023 by SuperDave938

[Crankywankynarancia]

Turret ( idk man)

[Desfar]

Anyone think a necromancer would use a bone whip?

[Crankywankynarancia]

Hmm desfar , I think it Looks like a saw whip